EDIT: If you would like to learn how to separate a head base check out my video here: https://youtu.be/WT4eZkuEapY?si=jXjzGbWhuHu6_iHD
Be sure to share your edit with the community if the license for your base allows it!
Base by ZabaCostumes. Please credit them when posting pics of your fursuit!
My printer was having trouble with the lower jaw when printing it all together so I separated the top and bottom.
I printed the base at 10000% for my printer, yours might have to print at a different percent. it gave me a smaller base than what you usually see from most fursuit makers. 11100% should be good for people who like larger style fursuit heads.
Infill 35%
Supports YES
I also included eyes as none were included. Modified from:
https://www.thingiverse.com/thing:4359645
Print eyes the same percent as your base. Print flat. Note they might not completely fit when unfurred but when furred they will.
Infill 10%
Supports NO
| crow_lower_jaw.stl | 2.7MB | |
| crow_top.stl | 5.7MB | |
| raven_mask_eye_blanks.stl | 94.8KB |
