A jerk lure which I made while training 3D modelling.
70 mm long, 25 mm high and 15 mm thick at thickest.
You need to add weight to make it sink. There is 5 mm room for weights at back section and 8 mm at front. Recommended to balance the jerk nose heavy. Add lead pellets to gain rattling effect.
Add weights, frame wire and glue halves together. Paint if you wish. Note: Painting and clear coating will hide the pattern. Use maximum of one layer of clear coat.
Work in progress.
03.05.2019 - V1.00 Initial release
04.05.2019 - V1.01 Changed wire frame hole orientations
| Rattling_Jerk_Lure_70mm_V1.01.stl | 398.8KB |
