Rat Swarm (Level Top) 3D Printer Model
The file 'Rat Swarm (Level Top) 3D Printer Model' is (stl) file type, size is 12.3MB.
The file 'Rat Swarm (Level Top) 3D Printer Model' is (stl) file type, size is 12.3MB.
In TTRPGs like DnD and Pathfinder, Rat Swarm enemies are Large creatures that can move into other characters' spaces, then attack everything in their space (instead of attacking adjacent spaces like normal monsters). So, I whipped up this Rat Swarm model with a level top! It's built so that other models can easily be set on top of it, to clearly show that the Rat Swarm is in the same space(s) as those other models without those other models falling over.
You'll probably want the 50mm version, but if you're using my magnetic bases, you'll want to use the 45.9 mm version so that it'll exactly fit the tops of those bases. If you go that route, I'd recommend against inserting the magnets into the bases of the rat swarms, as you don't want the other figures to be snapping towards the middle of this model!
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!
| Rat_Swarm_-_45.9mm.stl | 11.5MB | |
| Rat_Swarm_-_50mm.stl | 11.5MB |
![Wasteland Shack [RETURN TO THE BADLANDS] 3D Printer Model](https://res.3axis.co/606d9577-336a-494a-ad8a-651bea2ce755/images/b853e40f-12e5-44de-b987-1d826c51b9e9_thumb.jpg)
