Raspberry Pi 3 case, requires no screws. The two parts snap together.

Models:

• RaspberryPi 3B+: Works perfectly.
• RaspberryPi 3B: Works perfectly.
• RaspberryPi 3: Works perfectly.
• RaspberryPi 2: Should fit. Feedback?
• RaspberryPi B+: Community reported that it works.

Snap-in mechanism:
The case can be closed and reopened repeatedly. The snap-in mechanism goes around three sides of the case, is robust and provides a good fit.

Update 2021-12-12: Now with access to camera module and GPIO ports.

Remix from 0110-M-P

Printer models:
Printed on 20+ different 3D printer models by the community (see below)

Thanks for all the comments!

Printed myself:

• Ultimaker 2+: Nozzle 0.4mm (not 0.6!) / Cura 2.1.2 / Normal Quality / Infill Light / 2.85mm PLA filament

Printed successfully by the community on those printers:

• Anet A8: Rafts No / Supports No / Infill 30%
• Anet E12 printed on glass: 0.1 layer / Hatchbox Black PLA / 205C Nozzle / 50C Bed
• Anycubic I3 Mega: Rafts No / Supports No / Resolution 0.2 / Infill 20%
• Anycubic All-metal Mega: Rafts: No / Support No / Resolution 0.14 / Infill 10%
• Creality Ender 3 Pro: Rafts No / Support No / Resolution 0.2 / PLA
• Creality CR-10S / Rafts No / Supports No / Resolution 0.2 / Infill 20% / Amazon PETG
• Creality CR10S / Rafts No / Supports No / Resolution 0.2 / Infill 20% / PLA
• Creality Ender 3: Rafts No / Supports No / Devil Design ABS+
• Creality CR-10S: Rafts No / Supports No / Resolution 0.2 / Devil design PETG
• Creality CR-10 Mini: Rafts No / Supports No / Resolution 0.2 / Infill 20%
• Da Vinci Jr: Rafts No / Supports No / Resolution 0.1mm / Infill 20% / PLA / low speed / 0.2mm layer height
• FlashForge Creator Pro: Rafts No / Supports No / Resolution 0.2 / Infill 20%
• Prusa i3 MK2S: Rafts No / Supports No / Resolution 0.2 / Infill 20% / ABS
• Prusa Mk2: Rafts No / Supports No / Resolution 0.15mm / 0.4mm nozzle/ Infill: 0%, 10 top & 9 bottom layers, 6 perimeters
• Movtech Cubica: Rafts Yes / Supports Yes / Resolution 0.2 / Infill 20
• Q3D OneUp: Rafts No / Supports No / Resolution 0.1 / Infill 20%
• Silhouette Alta
• Ultimaker 2 Extended: Fill 40% / Layer 0.15mm / Nozzle 0.4mm / Shell thickness 0.8mm / Retraction on / Bottom-top thickness 0.8mm / Support everywhere
• Wanhao Duplicator i3 V2: Supports No / Resolution 0.2 / Infill 15%
• Wanhao Duplicator i3 Plus: Rafts No / Supports No / Resolution 0.2 / Infill 50%
• Zonestar Z8XM2: Rafts No / Supports No / Resolution 0.1 / Infill 50%