Raspberry Pi3 Case Tardislook 3D Printer Model
The file 'Raspberry Pi3 Case Tardislook 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Raspberry Pi3 Case Tardislook 3D Printer Model' is (stl) file type, size is 1.6MB.
I edited the version of the TARDIS by Jason3030 so that you can print 2 halves. On the one hand, the RPI 3 is built in as normal and on the other side and below in the foot a cheap china relay board (https://www.wish.com/product/587727216dd28e473532ada9) which can be used to control the relays via the GPIO'S (in my case for managing music in the apartment)
on the inside windows i cuted white Acryllic glass for the windowglasses
on the side in the roof i added a board with 433Mhz transmitter and on DHT22 Temperatur sensor wich sits into an window
the software is based on Jessie and the open source smart home solution Pilight -> http://www.pilight.org/
Inside there are 2 LEDs in white for lighting and a white one for flashing
I also adapted the webgui to Doctor Who
You should definitely print the big parts with support
i added i short clip where you can see how the LEd works
https://www.thingiverse.com/thing:4099242
enjoy
| Led_Holder_tardis.stl | 87.5KB | |
| tardis-spotlight.stl | 173.3KB | |
| tardis_1.stl | 4.1MB | |
| tardis_2.stl | 1.1MB | |
| tardis_fuß.stl | 156.6KB |
