This is a remake of Dimwit-Dave's Raspberry Pi Zero WiFi Camera Case I really like how small a case he packed the Pi and camera into but, I have a Pi Zero W and a V2 Camera and the mounting holes for the camera or the board didn't line up correctly for me so I copied his awesome design and made it fit my Pi and Camera.
I'm only using this with MotionEyeOS so ~Case.stl just has a cut out for power... while ~Case 2.stl has cutout for the other two plugs.
Note - This will not work with the short 40mm camera cable.
4/19/18 - On request I added a few new STL's that "should be able to be used with this Modular Mounting System
Pi Zero Case Arm Mount.STL is a whole new case that should mount right up.
Pi Zero Case Cover Arm.STL and Pi Zero Arm.STL can be super glued together and mounted that way.
Keep in mind.... I have not tried printing either of these new pieces myself.
6-4-18 = Fixed the Pi_Zero_Case_Arm_Mount.STL to have the cutout for the nut retainer on the covers (so any of the covers should fit now.)
| Pi_Zero_Arm.STL | 997.5KB | |
| Pi_Zero_Case_Arm_Mount.STL | 538.1KB | |
| Pi_Zero_Case_Cover.STL | 442.7KB | |
| Pi_Zero_Case_Cover_Arm.STL | 576.7KB | |
| Pi_Zero_Case_Cover_Vented_1.STL | 575.2KB | |
| Pi_Zero_Case_Cover_Vented_2.STL | 408.6KB | |
| Rapberry_Pi_Zero_W_Case.STL | 325.8KB | |
| Rapberry_Pi_Zero_W_Case_2.STL | 370.5KB |
