Raspberry Pi Zero LCD Brackets 3D Printer Model
The file 'Raspberry Pi Zero LCD Brackets 3D Printer Model' is (stl) file type, size is 295.6KB.
The file 'Raspberry Pi Zero LCD Brackets 3D Printer Model' is (stl) file type, size is 295.6KB.
This Thing provides a pair of brackets to mount an I2C-enabled 16x2 LCD display on a Raspberry Pi Zero. The clips should hold the LCD & Pi Zero securely without needing adhesive. There are two versions of the files. BracketR and bracketL are slightly asymmetrical - these are the originals I used to mount the LCD to a Pi Zero fixed to a small USB hub as shown in the pictures (the Pi Zero is not quite centred on the hub). BracketRs and bracketLs are symmetrical alternatives where the LCD is centred with respect to the Pi Zero. Please use one pair or the other, but don't mix them!
The Pi Zero SD card can be changed without removing the brackets.
Depending on their orientation, it may be necessary to bend the I2C connector pins on the LCD backpack as shown in photo 2. I also recommend using a level shifter to connect the 3.3V logic of the Pi Zero to the 5V LCD.
| bracketL.stl | 249.9KB | |
| bracketLs.stl | 249.9KB | |
| bracketR.stl | 265.8KB | |
| bracketRs.stl | 265.8KB |
