The file 'Raspberry Pi Turret 3D Printer Model' is (ipt,stl,xlsx,idw,pdf,iam,step) file type, size is 10.0MB.
This is a turret that has pan tilt movement capabilities. The original purpose of the turret was to be an antenna tracking turret ground station combo for flamewheel 450 quad-copters, and was meant to run ardupilot. It utilizes a raspberry pi 3, navio 2, 2 continuous servos, 7" raspberry pi touch screen, and 2 4" lazy Susan bearings to accomplish this goal. If you want to cut this yourself you need to add four wholes to the side that the servos point to for the mount that holds the servos in place, that is so eloquently named, servo thingy. The body of this thing is laser cut with the servo thingy and the servo mount being 3D printed. The bearings that were used were 4" laser susan bearings from mc master carr, dm me if you would like a link.
| BackBoard.ipt | 337.5KB | |
| Bearing.ipt | 417.5KB | |
| Bearing_4.ipt | 408.0KB | |
| Bottom.ipt | 343.0KB | |
| CameraAdapter.ipt | 180.5KB | |
| Camera_Adapter.ipt | 76.5KB | |
| FaceBoard.ipt | 374.5KB | |
| FrontBack.ipt | 221.0KB | |
| LeftSide.ipt | 354.5KB | |
| LeftSidePanel.ipt | 232.0KB | |
| RightSide.ipt | 324.0KB | |
| ServoMountT.ipt | 180.5KB | |
| ServoMountT.stl | 67.1KB | |
| ServoSpin.ipt | 165.5KB | |
| ServoSpintest.ipt | 190.0KB | |
| ServoSpinV2_nopegs.stl | 46.6KB | |
| ServoThingy.ipt | 194.5KB | |
| SidePanelRight.ipt | 259.5KB | |
| SlipRing.ipt | 136.0KB | |
| TBottom.ipt | 423.5KB | |
| Top.ipt | 336.0KB | |
| TurretDemensionsV4.xlsx | 9.1KB | |
| TurretV2_6_29_17.idw | 300.0KB | |
| TurretV2_6_29_17.pdf | 10.1KB | |
| TurretV4.iam | 2.3MB | |
| TurretV4.step | 23.9MB |
