Raspberry Pi – HP PSU Mount 3D Printer Model

License: CC BY-NC
File formats: stl
Download type: zip
Size:107.1KB

The file 'Raspberry Pi – HP PSU Mount 3D Printer Model' is (stl) file type, size is 107.1KB.

Summary

his PSU Mount is designed to fit the standard hole dimensions for Raspberry Pi 2B-4B but to be mounted on an HP PSU via our HP PSU Straps (https://www.thingiverse.com/thing:5608721)

The design has an in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.

You will want to download the HP PSU Mounts from https://www.thingiverse.com/thing:5608721

Mounting Hardware:

2x - M4 - 8mm bolts (secure mount to PSU)

4x - M2 - 12mm bolts/nuts (secure controller to mount)

4x - 3mm Spacers (provided by us)

HP_-_Raspberry_Pi_-_2-4.stl 291.2KB
Spacer.stl 52.9KB