This is a remix of an existing case for the original Raspberry Pi camera module by deadsy. I made it fit for the 220 degree fisheye camera, which required slightly adjusted settings for the mount and a larger hole. I also added an optional angle because I mounted my camera under the roof of a birdhouse. The angle for the roof is adjustable in the OpenSCAD file, the added STL file is only an example. I made mine so that the camera is tilted slightly forward, as it does not make much sense to see the back side of the bird house, one wants to see the front side with the entrance. You may need to adjust depending on your specific situation (use the scad file). I printed the housing in black PLA to avoid any power LED to be seen inside the birdhouse. If you use other screws than I did you may also need to adjust the scad file slightly.
For running it I used the tool RPi-Cam-Web-Interface and made the whole setup read-only (do not only read the instructions but also the comments as they include further needed changes). Two images in the list show the result, the pinkish one the original view and the more regular color after automatic cropping and color shift.
| camera-with-angle.scad | 11.6KB | |
| fisheyecam-angle.stl | 46.4KB | |
| fisheyecam-base.stl | 172.5KB | |
| fisheyecam-lid.stl | 81.2KB |
