The project contains:
One left and one right front element.
One rear element (print it twice).
Screws (you need 8 for 2.5" SSD/HDD and 4 for Raspberry Pi):
SSD/HDD
Screw diameter: M3
Screw length: 4 - 5mm
Raspberry Pi with PoE Hat
Screw diameter: M2.5
Screw length: 8 - 10mm
| rpi_2x_ssd_open_case_front_l.stl | 47.2KB | |
| rpi_2x_ssd_open_case_front_r.stl | 47.2KB | |
| rpi_2x_ssd_open_case_rear_l_r.stl | 45.4KB |
