Raspberry Pi Case – Wall Or Monitor Mounted With HDMI Option 3D Printer Model
The file 'Raspberry Pi Case – Wall Or Monitor Mounted With HDMI Option 3D Printer Model' is (stl) file type, size is 139.3KB.
The file 'Raspberry Pi Case – Wall Or Monitor Mounted With HDMI Option 3D Printer Model' is (stl) file type, size is 139.3KB.
Fixing Holes are 4off M4 100mm x 55mm
Wall mountable case for a Raspberry Pi, also can be mounted to a 100mm Vesa mount. Ideal for use with display panels (CCTV) or other network devices.
Please Note: Don't forget to adjust the regulator board to 5V BEFORE connecting the Raspberry Pi, these boards are shipped with the adjustment turned up high and will damage your Pi!
The reason I used a regulator board to power the Pi is that 12V wall adaptors are more common place than good 5V 2A ones, also I don't like the flimsy micro USB connectors. The current draw at @12V for this finished unit was around 130mA when using a B+, maybe a little more for a Pi 3.
Parts
3off M3 Brass Inserts
3off M3 6mm Bolts
6off No Screw 6.5mm
1off Regulator Board Ebay (Search for "Output 1.23V-30V DC-DC Buck Converter Step Down Module LM2596 Power Supply")
1off DC Jack
1off 1N4001 Diode
1off 5mm LED plus Resistor (could be single colour or RBG)
1off Raspberry Pi
| Case_With_HDMI_Base.stl | 348.9KB | |
| Case_With_HDMI_Lid.stl | 149.5KB |
