Raspberry Pi Camera Telescope Mount 3D Printer Model
The file 'Raspberry Pi Camera Telescope Mount 3D Printer Model' is (stl) file type, size is 219.78 KB.
The file 'Raspberry Pi Camera Telescope Mount 3D Printer Model' is (stl) file type, size is 219.78 KB.
This is a mount that allows a Raspberry Pi camera (v1 or v2) to be used in a telescope for astrophotography. The eyepiece will fit any 1.25" focuser. To use the Pi Camera for astrophotography you will need to remove the lens that covers the sensor, this can be done with a pair of long nosed pliers, carefully gripping the lens and rotating. YOU MUST GRIP THE CIRCULAR PART AND NOT THE SQUARE PART.
There are two files, one for the eyepiece that goes into the focuser and another for a cap that sits over the top, you will also need the following:
You may want to use a longer data cable that is available on the internet depending on how far away from your Pi you have the camera (mine is attached to the body of the telescope).
| rpi-cam-cap.stl |
| rpi-cam-tube.stl |
