The file 'Raspberry Pi Camera Mount For 2020 Or 2040 Extrusions (CR-10, CR-10s, Ender 3, Ender 5, Etc.) 3D Printer Model' is (step,stl) file type, size is 203.2KB.
Update 2020/07/29: Added STEP file for project.
Update 2020/02/10: Updated arms to have greater support for the weight.
I designed this camera mount to be used on any 2020 or 2040 extrusion-based printer. You can mix and match the various rigid extensions or create your own! The following video has full assembly instructions: https://youtu.be/aPOUPXh9m-g
Hardware Needed:
Camera: Arducam 5 Megapixels 1080p OV5647 Camera Module
https://www.amazon.com/gp/product/B012ETE75I/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=kerseyfabs-20&linkId=e2797db44db54482950d4da82781a6a7&language=en_US
Camera Mount:
4 x M3 12mm Screws
2 x M3 8mm Screws
6 x M3 Nuts
Extensions:
2 x M5 20mm Socket Head Cap Screws (Minimum): https://www.amazon.com/gp/product/B012ETE75I/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=kerseyfabs-20&linkId=e2797db44db54482950d4da82781a6a7&language=en_US
2 x M5 Nuts (Minimum)
4 x M5 Washers (Minimum)
Mounting to Extrusions:
2 x M5 10mm Screws
2 x M5 T-Nuts: https://www.amazon.com/gp/product/B012ETE75I/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=kerseyfabs-20&linkId=e2797db44db54482950d4da82781a6a7&language=en_US
All of the screws, nuts, and washers from above you'll need except for the M5 Socket Head and M5 T-Nuts:
https://www.amazon.com/gp/product/B012ETE75I/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=kerseyfabs-20&linkId=e2797db44db54482950d4da82781a6a7&language=en_US
Links to various components above are affiliate links. Thanks for supporting my designs!
| Arducam_OV5647_v6.step | 315.5KB | |
| MainBody_v19.stl | 126.8KB | |
| Screws_angled_arm_v6.stl | 111.2KB | |
| Screws_Base_v2.stl | 110.3KB | |
| Screws_long_arm_v6.stl | 89.1KB | |
| Screws_Pivot_v4.stl | 82.0KB | |
| Screws_short_arm_v6.stl | 108.0KB | |
| TopBody_v19o.stl | 137.8KB |
