https://www.youtube.com/watch?v=ciCKvehNFDM
This is the raspberry pi camera camera module fitted inside a 3d printed enclosure and mounted to a 3d printed tripod. This simple design is easy to 3d print and takes a few minutes to put together.
You can use a Swivel-Head Adapter to adjust the position of the camera with free range of motion and it locks in place with a side screw. You’ll need a few machine screws and other camera bits to assemble this project along with the 3D printed parts and raspberry pi camera module.
We’re using this tripod for capture timelapses using OctoPrint but we could also use this as a security camera. You can check out our playlist linked below for more raspberry pi projects.
Full Tutorial on the Adafruit Learning System
https://learn.adafruit.com/3d-printed-pi-camera-case-and-tripod/overview
| picam-adapter.stl | 99.8KB | |
| picam-back.stl | 178.0KB | |
| Picam-front.stl | 197.9KB | |
| tripod-base.stl | 168.4KB | |
| tripod-foot.stl | 82.3KB | |
| tripod-leg.stl | 27.6KB |
