Raspberry Pi Cam V2 (Raspicam) Anycubic I3 Mega S Heatbed Mount 3D Printer Model
The file 'Raspberry Pi Cam V2 (Raspicam) Anycubic I3 Mega S Heatbed Mount 3D Printer Model' is (step,stl) file type, size is 210.4KB.
The file 'Raspberry Pi Cam V2 (Raspicam) Anycubic I3 Mega S Heatbed Mount 3D Printer Model' is (step,stl) file type, size is 210.4KB.
Here is a simple articulated and adjustable heatbed mount for the Raspberry Pi cam V2. It was an iterative process to get all of the angles dialed in to give a good field of view across the print bed. I have attached a picture showing what the FoV looks like from the cam via OctoPrint.
The print requires 2 M2x10mm screws and 2 M2 nuts for assembly
Once the mount is assembled, the clip part slips snugly over the y-axis frame, straddling the left y-axis bearing rod and rod holder (clip has an indented section for clearance and to show designed-to positioning). The assembled mount can then be adjusted at the arm and camera case until the desired FoV is achieved.
I have also included the STEP files in the event that you want to play with the lengths and angles to adjust the camera FoV to your liking. I tried to get nearly all of the bed in frame with a view angle that is able to capture a variety of build heights.
Enjoy!
| Raspicam_mount_arm2_v5.step | 138.6KB | |
| Raspicam_mount_arm2_v5.stl | 104.1KB | |
| Raspicam_mount_base_clip_v5.step | 83.0KB | |
| Raspicam_mount_base_clip_v5.stl | 86.1KB | |
| Raspicam_mount_cam_v4.step | 169.8KB | |
| Raspicam_mount_cam_v4.stl | 248.7KB |
