Raspberry Pi B+ Mini Classic NES Case. 3D Printer Model
The file 'Raspberry Pi B+ Mini Classic NES Case. 3D Printer Model' is (stl) file type, size is 184.3KB.
The file 'Raspberry Pi B+ Mini Classic NES Case. 3D Printer Model' is (stl) file type, size is 184.3KB.
Warning: Although the Raspberry Pi 3 will fit in this case comfortably the Motorola-SPN5356A that I recommended earlier will not supply enough current for it. I recommend you look for an updated power solution or use touxiong's remix. I plan to update this model for a more available and standardized power supply when I get the time. Thanks!
Update: Version 1.1
Fixed proportions, added a card access door, reduced floor thickness of top and bottom pieces(also reduces print time), increased bulk of cable strain relief, dropped power supply holder a few mm, added cartridge carriage(optional, experimental), added integrated supports for top and bottom, various small improvements and cleanup.
Version 1:
A miniature Nintendo Entertainment System(NES) case for raspberry pi B+ complete with working front power/reset buttons and power indicator LED.
Honest efforts were made to remain true to the original NES proportions and appearance(only 55% smaller). This project is not for the faint of heart. Expect frustration. Some basic electronics knowledge and additional parts are necessary for complete design.
For best results the raspberry pi board will need to be physically altered.
| nespi-backtop.stl | 11.0KB | |
| nespi-bottom.stl | 602.1KB | |
| nespi-button.stl | 1.4KB | |
| nespi-buttoncarrier.stl | 22.7KB | |
| nespi-carddoor.stl | 5.6KB | |
| nespi-carriage.stl | 24.9KB | |
| nespi-cordrelief.stl | 28.6KB | |
| nespi-door.stl | 6.7KB | |
| nespi-frontports.stl | 10.8KB | |
| nespi-fronttop.stl | 21.8KB | |
| nespi-helperdisk.stl | 15.7KB | |
| nespi-top.stl | 199.7KB | |
| nespi-usbholder.stl | 4.8KB | |
| nespi-vent.stl | 68.1KB |
