This is a simple stand for the official Raspberry Pi Touchscreen screen.
Create for the #PiIoT design challenge on element14.com, to follow the progress check out
To attach the legs of the stand to the Pi Display you will need 4-40x3/8 screws that you can get at your local hardware store.
To solve the upside-down issue you need to add the following line to the config.txt file, if you have a wireless keyboard connected open the terminal and run the following command
sudo nano /boot/config.txt
and then add the following line to the file
lcd_rotate=2
| PiTouchScreen_LeftLeg.stl | 53.7KB | |
| PiTouchScreen_RightLeg.stl | 54.0KB | |
| PlacardPiIOT.stl | 997.4KB |
