Raspberry Pi 5 Quality Case, With VESA Mount (V3.6) 3D Printer Model
The file 'Raspberry Pi 5 Quality Case, With VESA Mount (V3.6) 3D Printer Model' is (stl) file type, size is 16.6MB.
The file 'Raspberry Pi 5 Quality Case, With VESA Mount (V3.6) 3D Printer Model' is (stl) file type, size is 16.6MB.
Just another case for Raspberry PI 5 with or without active cooler.
Because the fan cooling there are not too many ventilation holes in the case.
Slightly everything holds together without any screws.
That is nice if you must open and close it many times.
But definitely I recommend the two screws in the front (2 x 2.5mm/8mm, countersunk ).
The other four screws are also 2.5mm.
SD card can be handled easily from the back.
| Case_PI5_Vesa_v3.6.stl | 34.8MB | |
| Cover_and_front_no_screws_PI5_v3.3.stl | 1.9MB | |
| Push_Down_v3.1.stl | 894.2KB |
