The file 'Raspberry PI 5 Case With PoE Hat And NVMe Base Support 3D Printer Model' is (stl,STEP,step) file type, size is 870.0KB.
PI 5 case that fits single or dual NVMe M.2 base, as well as PoE Hat.
Designed around the Pimoroni Base and wave share hat
-can be attached to bottom using m2.5 nuts or socket head screws
-use 10mm X m2.5 standoffs between the NVMe base/PI and between the PoE hat/top case
-use 16mm X m2.5 standoffs between the pi and PoE hat
-use m2.5 screws into the top standoffs to hold on the top of the case
| Bottom_no_vent_holes.stl | 137.5KB | |
| Bottom_with_mountign_tabs_and_no_vent_holes.stl | 173.0KB | |
| Bottom_with_mountign_tabs_and_vent_holes.STEP | 975.6KB | |
| Bottom_with_mounting_tabs_and_no_vent_holes.step | 210.4KB | |
| Bottom_with_mounting_tabs_and_vent_holes.stl | 343.0KB | |
| Bottom_with_no_vent_holes.step | 171.1KB | |
| Bottom_with_vent_holes.STEP | 905.9KB | |
| Bottom_with_vent_holes.stl | 307.4KB | |
| Power_Button.STEP | 18.4KB | |
| Power_button.stl | 43.5KB | |
| Top_no_vent_holes.stl | 151.3KB | |
| Top_with_No_vent_holes.step | 248.1KB | |
| Top_with_vent_holes.STEP | 1000.1KB | |
| Top_with_vent_holes.stl | 321.2KB |
