Raspberry Pi 4/5 1U Rack-mount Bracket Merged 3D Printer Model
The file 'Raspberry Pi 4/5 1U Rack-mount Bracket Merged 3D Printer Model' is (stl) file type, size is 855.0KB.
The file 'Raspberry Pi 4/5 1U Rack-mount Bracket Merged 3D Printer Model' is (stl) file type, size is 855.0KB.
I took one tray and duped 5 more instances. I then lined them all up as carefully as possible then merged them into one object. Then I used the cut with dovetail option in PrusaSlicer 2.7.4 and ended up with two pieces that will slide together as one unit to fit into a 19" rack without need of the steel support rods from the original design. I would recommend using some CA glue to join the two halves. Slide them together but not completely, add a few drops of glue then slide them into place and tap gently with a screw driver or a plastic mallet. Use gel type CA so you have time to get the alignment perfect, the thin, watery type of CA dries almost instantly and you could end up with a ruined mess. I used tree supports just because my printer isn't all that great on bridges and overhangs but you can skip the supports if your printer is tweaked up. I made this to fit on my E3 Max Neo but if you have a smaller printer you can print the parts one at a time by rotating them 45deg. and dragging one off the print bed then reverse the process to print the other one.
| raspberry-pi-6x_dovetail_rack-1u-frame_v2.0.stl | 1.5MB | |
| raspberry-pi-rack-1u-ears.stl | 1.8MB | |
| raspberry-pi-rack-tray.stl | 3.4MB |
