Raspberry Pi 40mm Fan Shroud 3D Printer Model
The file 'Raspberry Pi 40mm Fan Shroud 3D Printer Model' is (stl) file type, size is 46.7KB.
The file 'Raspberry Pi 40mm Fan Shroud 3D Printer Model' is (stl) file type, size is 46.7KB.
I needed a simple but effective way to control the airflow onto the CPU/GPU Heatsink of a Raspberry PI 4B. I made this to go right over them. I used a little bit of double sided tape to stick it down, and it works great.
It also has a small ring for cable management.
I printed it fan facing down, 10% infill, 80mm/s, with tree supports.
| RPi_-_Fan_Shroud_40mm.stl | 138.2KB |
![64×64 RGB Matrix [2.5mm Pitch] With Raspberry Pi Mount 3D Printer Model](https://res.3axis.co/dc0a211b-8d23-407c-bc3f-fbf816c094e9/images/5fda6c1e-8da1-444a-85f0-5af9b43bfada_thumb.jpg)
