Raspberry Pi 4 Super Silent Case With 2.5 HDD(SSD) Mount 3D Printer Model
The file 'Raspberry Pi 4 Super Silent Case With 2.5 HDD(SSD) Mount 3D Printer Model' is (stl,STL) file type, size is 757.0KB.
The file 'Raspberry Pi 4 Super Silent Case With 2.5 HDD(SSD) Mount 3D Printer Model' is (stl,STL) file type, size is 757.0KB.
Super silent case for Raspberry Pi 4 with mount for HDD(SSD). Case is cooled by 12V old power supply from pc fan 80x80x25 mm. Fan is connected to 5V Raspberry out that cause fan is super silent. Practically no noise from fan. Temperature processor do not exceed 55°C in case see the Stressberry test screen. I used heat sink from old i386 processor.
Recessed side connector prevent damage from side. The case have not openinng for micro SD card because is used SSD for booting.
I used M3 screws for mounting.
See my second extra slim version https://www.thingiverse.com/thing:5211613
EDIT1: I added stl of side cover with holder for micro SD extend adapter like this: https://www.ebay.com/c/25016580769 . Thanks for comment of kevinthefixer
EDIT2: I added stl of wall mount frame. You can use it for hinged case on wall, back monitor etc. For attaching i use double sided sticker, the case is removally hnged. The space between wall and case is optimally for air flow for cooling.
EDIT3: I added stl of frame for mounting ssd to RPi. This is remix of this: https://www.thingiverse.com/thing:3126622
| bedna3logo.stl | 906.0KB | |
| bok1.stl | 481.1KB | |
| bok2.stl | 330.6KB | |
| bok_microSD.stl | 523.0KB | |
| HDD_frame_to_RPI.STL | 592.6KB | |
| wallmount.stl | 48.9KB |
