A simple yet practical Raspberry Pi case.
Encases the Pi, holds it in place, and has a spacer under the screen so it is held level with the case.
M2.5 x 6mm Cap screw with M2.5 nuts
M3 x 25mm Cap bolts/screws with M3 nuts
| RPi_Camera_Mount.stl | 110.8KB | |
| RPi_Case_Bottom.stl | 141.3KB | |
| RPi_Case_Top.stl | 141.1KB | |
| Screen_Spacer.stl | 54.3KB |
