Yet another Raspberry Pi 4 case!
NEW 6th April '22 - v1.2
- Corrected hole distances
- Added tapered bolt holes
- Strengthening
- Minor tidy ups
- Better fitting with stand and case lid
- Improved text readability
- Widened side vent so a ribbon cable can pass through without obstruction
(requires cutting away of vent uprights)
NEW 26 July '19
- Now with stylish stand / cable tidy!
- v1.1b case bottom with larger micro HDMI ports
Features:
- Active cooling with a 30 x 30 x 7 mm fan (max 10mm fan)
- Well ventilated
- No glue or screws - slide or bolt together
- Wall / project mount plate with quick slide removal
- 2 part case, 1 part wall mount, 1 double stand (back and front mount)
- Holes for GPIO port, display, LEDs etc..
- Easy removal of Micro SD card
- Ports labelled
- Easy to fit, quick to print, cheap to make
- Cool Logos!
Note: Just made a few minor tweaks including stop for bottom plate and slight adjustment for USB connectors (v1.1)
Fan is 30 x 30 x 7mm ... currently from
https://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=30+x+30+x7+fan&_blrs=spell_check
or from Amazon ...
https://www.amazon.co.uk/s?k=30+x+30+x+7+fan&crid=3ETO4S5D25JMA&sprefix=30+x+30+x+7+fan%2Caps%2C78&ref=nb_sb_noss
