Raspberry Pi 4 B Low Profile 40mm FAN Case (Zip Tie Mountable) 3D Printer Model
The file 'Raspberry Pi 4 B Low Profile 40mm FAN Case (Zip Tie Mountable) 3D Printer Model' is (stl) file type, size is 96.0KB.
The file 'Raspberry Pi 4 B Low Profile 40mm FAN Case (Zip Tie Mountable) 3D Printer Model' is (stl) file type, size is 96.0KB.
This Raspberry Pi case is for the brand new model 4B. This case is low profile and the top is designed for mounting a Noctua 40mm fan, it also features multiple sets of holes on the bottom surface to allow Zip ties to be threaded through for easy mounting (I recommend putting the zip ties in before installing the Pi). Also, this case allows the Pi to be snapped in without the need for additional hardware. The opening for the GPIO pins will also accommodate a standard notched 40-pin ribbon cable connector.
*Note: These parts are interchangeable with my previous Raspberry model 4B case, however the bottom on this design has significantly more ventilation slats.
| Pi4B_Case_Bottom_Fan.stl | 217.6KB | |
| Pi4B_Case_Top_Fan.stl | 187.4KB |
