This is a case for the official Raspberry Pi 7" touchscreen. https://www.raspberrypi.org/products/raspberry-pi-touch-display/

There is enough room to connect the display ribbon and the power all inside the case.

This matches my Raspberry Pi case found here. https://www.thingiverse.com/thing:3361218

If you are looking for a touchscreen case for the 4B, check out the case here. https://www.thingiverse.com/thing:4610955

Configurations

Multiple back cover configurations.

• Standard
• Slotted for a camera ribbon
• 25 mm and 30 mm fan cutouts
• Clean version (great for modding and remixing)

Assembly

To assemble you will need

• A #6-32 tap.
• 4 x #4-40 x 3/8 stainless socket head cap screws.
• 8 x #6-32 x 1/2 stainless socket head cap screws.
• 4 x #6-32 x 1 stainless socket head cap screws.

More detailed instructions can be found here. Assembly Instructions.

Updates

10/23/2020 Update.

• Added More Screen Clearance.

9/30/2020 Update.

• Added 40 mm fan covers.

1/21/2019 Update.

• Added slotted, 25 mm fan and 30 mm fan covers without the honeycomb.

1/20/2019 Update.

• I changed the bolt pattern to accommodate #6-32 screws.
• Added support backing for the frame screws.
• Added material behind the frame mounts.
• Added 4 frame mount points to better compress the screen.
• Changed leg geometry to clear the new frame mounts.

1/19/2019 Update.

• Changed the honeycomb pattern, it is much cleaner.
• Lengthened the legs to accommodate larger USB power cables.

1/18/2019 Update.

• Added a slotted back cover for a camera ribbon.
• Added a 25 mm and a 30 mm fan back cover.
• Added a blank back cover.

1/17/2019 Update.

• Rotated STL files to lay on print bed.
• Combined the left and right legs into one STL file.
• Increased the thickness of the legs.