-Easy access to every connector
-Breakable GPIO opening
-Internal mounting holes (4x M2x10 or M2x14) (https://www.amazon.com/gp/product/B004AFALM8/ref=as_li_tl?ie=UTF8&tag=olidtopi-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B004AFALM8&linkId=068c18924f827651725039b4cfb9706c)
-Micro SD card does not protrude but still accessible (https://www.amazon.com/gp/product/B004AFALM8/ref=as_li_tl?ie=UTF8&tag=olidtopi-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B004AFALM8&linkId=068c18924f827651725039b4cfb9706c)
-Light guide
-Compatible with Raspberry Pi 3, 2 and B+, (https://www.amazon.com/gp/product/B004AFALM8/ref=as_li_tl?ie=UTF8&tag=olidtopi-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B004AFALM8&linkId=068c18924f827651725039b4cfb9706c)
Raspberry Pi 3, 2 and B+ version have enough power to run a wifi usb stick, 3d printer and logitech camera without another powered usb hub. Reduce the amount of wires around an OctoPrint setup.
Printed with a Solid Utopia V2 at 0.150mm layer height, 100/120mm/s
2015-01-21 I uploaded a new version with more gap between the usb port and the pcb and more clearance under pcb. The fasteners pad have more strength too.
Enjoy!
Normand
http://solidutopia.com
| Raspberry_Pi_Bp_top_no_logo_v2.stl | 3.3MB | |
| RasPi_Bp_bottom.stl | 1.1MB | |
| RasPi_Bp_top.stl | 1.4MB | |
| RasPi_Bp_top_no_logo.stl | 1.0MB | |
| RaspPi_Bp_bottom_case_V2.stl | 3.1MB | |
| RaspPi_Bp_top_case_logo_pi_V2.stl | 5.4MB |
