Raspberry Pi 2/3 Case For Prusa I3 3D Printer Model
The file 'Raspberry Pi 2/3 Case For Prusa I3 3D Printer Model' is (stl) file type, size is 144.1KB.
The file 'Raspberry Pi 2/3 Case For Prusa I3 3D Printer Model' is (stl) file type, size is 144.1KB.
This is a modified Raspberry Pi case intended to be mounted above the Prusa i3 control board. There are two pieces. One of them has screw holes that match the holes in the metal main structure of the Prusa i3. You can place your Raspberry Pi 2/3 in this case and mount it to your Prusa.
Instructions - use 4 x #4 1/4" wood screws to attach the two cases together. I couldn't find screws to mount the pi inside of the case, and it turns out it wasn't necessary. The pi sits firmly inside the case on its own. Use 2 x M3x10 screws to attach the whole thing to the metal super structure of the Prusa i3. Be sure to adjust the distance of the mounting holes to fit your Prusa's mounting holes. I may have measured wrong by a mm or two and had to adjust with a hand drill (rather than re-print the case).
Also - using Slic3r works well to prepare for printing but Simpli3D seems to have a better support structure algorithm and makes cleaning up the object after printing much easier. It's expensive at $149 but, for me, well worth it.
| raspberry_pi_case_for_prusa_i3-2.stl | 197.2KB | |
| raspberry_pi_case_for_prusa_i3-3.stl | 263.4KB |
