Raspberry Pi 2 Case With Mounting Bracket 3D Printer Model
The file 'Raspberry Pi 2 Case With Mounting Bracket 3D Printer Model' is (stl) file type, size is 755.1KB.
The file 'Raspberry Pi 2 Case With Mounting Bracket 3D Printer Model' is (stl) file type, size is 755.1KB.
This case is based on this one;
http://www.thingiverse.com/thing:922740
I changed it to take M3 locknuts to screw the case together, added a separate mounting bracket to mount the case and to clear the bottom for cooling when the box is used just sitting somewhere. Also made the box a bit larger on one side to create room for airflow from bottom to top.
I use mine to play music/stream spottify
If you use it with the mounting bracket you need 30mm m3 screws.
I printed mine with a 0.4 nozzle , 0.15 layer
If you want to modify this thing you'll find the step file here;
https://www.youmagine.com/designs/raspberry-pi-2-case-with-mounting-bracket
| Bottom_PiCase-v11.stl | 549.4KB | |
| Top_PiCase-v11.stl | 1.7MB | |
| WallFrame_PiCase-v11.stl | 430.6KB |
