This is a Raspberry Pi 2 case. I printed the case in two colours - the chassis in grey and the top cover in orange. Then I used 4 x 25mm plastic anchors with 8 screws to fix the case. I have also prepared four columns in stl files so you may print them out instead of using plastic anchors.
4 files are included here :
| RaspberryPi2Case_1.2.stl | 406.1KB | |
| RaspberryPi2Case_1.3.stl | 342.9KB | |
| RaspberryPi2Case_1.4.stl | 112.6KB | |
| RaspberryPi2Case_1.skp | 1.3MB |
