This is a Raspberry Pi case that I designed in Google Sketchup for a common 7-inch touch screen. While it may be compatible with many, it was specifically designed for this one (link below): https://www.amazon.com/gp/product/B07VNX4ZWY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I have the included the full design if you have a big enough build area and want to print it all at once. Additionally I have individual pieces where it is cut into fourths so it can be built on a small build area. I used a Monoprice Mini Select V2 with a 120mm³ build area and I was able to build two pieces at once. I designed this off of the Raspberry Pi 4b but it could be compatible with others.
Please let me know if you have any comments or suggestions or if you simply enjoy the model.
Thank you!
| Screen_Case_V_6.skb | 1.4MB | |
| Screen_Case_V_6.skp | 1.4MB | |
| Screen_Case_V_6.stl | 464.1KB | |
| Screen_Case_V_6_Bottom_Left_Door.skp | 1.2MB | |
| Screen_Case_V_6_Bottom_Left_Door.stl | 53.2KB | |
| Screen_Case_V_6_Bottom_Left_Mainbody.skb | 1.2MB | |
| Screen_Case_V_6_Bottom_Left_Mainbody.skp | 1.2MB | |
| Screen_Case_V_6_Bottom_Left_Mainbody.stl | 105.7KB | |
| Screen_Case_V_6_Bottom_Right_Door.skp | 1.2MB | |
| Screen_Case_V_6_Bottom_Right_Door.stl | 2.9KB | |
| Screen_Case_V_6_Bottom_Right_Mainbody.skp | 1.2MB | |
| Screen_Case_V_6_Bottom_Right_Mainbody.stl | 55.5KB | |
| Screen_Case_V_6_Pin.skp | 1.2MB | |
| Screen_Case_V_6_Pin.stl | 43.6KB | |
| Screen_Case_V_6_Top_Left_Door.skp | 1.2MB | |
| Screen_Case_V_6_Top_Left_Door.stl | 9.1KB | |
| Screen_Case_V_6_Top_Left_Mainbody.skb | 1.2MB | |
| Screen_Case_V_6_Top_Left_Mainbody.skp | 1.2MB | |
| Screen_Case_V_6_Top_Left_Mainbody.stl | 113.7KB | |
| Screen_Case_V_6_Top_Right_Door.skp | 1.2MB | |
| Screen_Case_V_6_Top_Right_Door.stl | 16.4KB | |
| Screen_Case_V_6_Top_Right_Mainbody.skp | 1.2MB | |
| Screen_Case_V_6_Top_Right_Mainbody.stl | 78.8KB |
