Don't forget to like this design before downloading.
Anycubic Kossel Klipper guides
Kossel Marlin extruder calibration
Kossel Marlin flow calibrationn
Kossel adjustible extruder mount
Kossel Raspberry camera IR mount
Kossel Thermal runaway troubleshooting
Hi,
This is enhanced version of this camera mount:
https://www.thingiverse.com/thing:3628257
Camera is mounted with 4 screws which you will get in the package.
Camera:
https://www.aliexpress.com/item/32932807062.html
Update 01 06 2019:
Arm-joint 20/30/40mm rotatable 100°
1x M3 12/16mm bolt
1x M3 nut
Arm-joint-2 20/30/40mm rotatable 170°
1x M3 12/16mm bolt
1x M3 nut
For EBasicVersion you will only need:
16g of filament
4x M3 8 mm bolt
2x M3 18 mm bolt
1x M4 10 mm bolt
3x M3 nut (1 is optional)
For ELargerBase:
18g of filament
5x M3 8 mm bolt
2x M3 18 mm bolt
2x M4 10 mm bolt
4x M3 nut (1 is optional)
| Arm-8-20-Joint-2.stl | 156.6KB | |
| Arm-8-20-Joint.stl | 152.9KB | |
| Arm-8-20.stl | 147.3KB | |
| Arm-8-30-Joint-2.stl | 130.9KB | |
| Arm-8-30-Joint.stl | 127.6KB | |
| Arm-8-30.stl | 128.6KB | |
| Arm-8-40-Joint-2.stl | 112.2KB | |
| Arm-8-40-Joint.stl | 107.5KB | |
| Arm-8-40.stl | 104.0KB | |
| Cover-2-var4.stl | 308.3KB | |
| Cover-body-var4.stl | 521.6KB | |
| EBasicVersion.zip | 557.0KB | |
| ELargerBase.zip | 437.4KB | |
| Holder--1-3mm-var5.stl | 458.3KB | |
| Holder--1-4mm-var5.stl | 468.1KB | |
| Holder-2-var4.stl | 140.1KB | |
| Holder-4-var5.stl | 127.8KB |
