RASA 11 Dewshield 3D Printer Model
The file 'RASA 11 Dewshield 3D Printer Model' is (STL,stl) file type, size is 668.6KB.
The file 'RASA 11 Dewshield 3D Printer Model' is (STL,stl) file type, size is 668.6KB.
Hi,
This dewshield is inteded for the 11" RASA.
The dew shield is really heavy duty so I can hang my flat field panel on it.
Because of my printbed size of 300/300mm i had to first make a base in 4 parts.
You'll need to print part A and B both 2 times.
The 4 parts are bolted toghether for which i used threaded inserts.
Part A has a slot for a cable to pas through and a slot to fit over the nodges on the RASA OTA.
The dewshield is 300mm so if your printer is smaller you'll need to slice it into smaller pieces.
The Dewshield is bolted in the base with 4 M4 bolts and again i used threaded inserts.
The cabletiedown-part is self explanatory.
I spraypainted the base and dewshieldtube black on the inside and flocked the shield (the paint helps for adhesion)
| M4_Hex_bolt.STL | 972.2KB | |
| RASA_11_dewshieldtube_1.stl | 474.5KB | |
| RASA_Base_cabletiedown_1.stl | 32.9KB | |
| Rasa_Dewshield_Base_Part_A.stl | 101.8KB | |
| Rasa_Dewshield_Base_Part_B.stl | 64.8KB |
