Ranger 1600/2000 – Cockpit Walksnail With Gimbal DIY 3D Printer Model Free Download

Description Files (11)

Summary

I invite you to download the remix of the Ranger 1600/2000 glider cockpit design.

Compared to the original, the design has been modified in the following areas:

Many mistakes in polygons, empty micro walls, etc. in the design have been removed
The rear part has been rebuilt, which did not fit perfectly to the model and was difficult to fit
The screw holes for the clips have been improved
The socket for the gimbal servo has been improved and deepened. Now it does not protrude above the surface
The entire cockpit has been slimmed down to reduce the weight and clumsiness of the element
The angles of the walls, which were often accidental, have been improved
An adapter has been added to allow VTX mounting in a 25mm spacing (M2) or via a 20mm adapter (M3)
The rear wall has been separated from the cockpit base. The cockpit does not require gluing these elements together, but it can be done. It is important to glue the connection pins to one element
The hole for moving the camera has been enlarged
Ventilation holes have been added

Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_Adapter_Walksnail_25to20.stl	68.8KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_cockpit-back.stl	44.2KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_cockpit-front-2ANT.stl	909.8KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_cockpit-front.stl	935.8KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_cockpit_locks_1.stl	219.4KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_cockpit_locks_2.stl	111.1KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_cockpit_locks_3.stl	111.1KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_cockpit_locks_4.stl	219.4KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_pin1.stl	4.8KB
Ranger1600-cockpit_Walksnail_gimbal_DIY_Ranger1600_v66_pin2.stl	4.8KB
Ranger1600_-_Cockpit_Walksnail_and_gimbalDIY-BAMBU-STUDIO.3mf	521.8KB