Extra tray for the espresso mill Rancilio Rocky. It clips under the front so it stays put during operation of the mill - no more spilling :)
Update: Tray4 is now more easy on the eye and uses a coin battery CR2032 as an anchor. You can glue it into the tray and use a strong magnet from below to hold the tray in place.
Update 14-Oct-2016: Improved hidden fixing of the tray. The Tray4 shallow fix with the coin cell was not high enough so the tray slipped easily when pushing the grinder switch. The new version uses a taller socket behind the rear wall. I have glued the socket (Halter) with double sided tape to the bottom of the mill. This now works much better than the previous design and has a cleaner look.
| Halter.stl | 189.0KB | |
| Schale+Halter.stl | 977.1KB | |
| Schale.stl | 788.2KB | |
| Tray2.stl | 55.3KB | |
| Tray4.stl | 357.2KB |
