I used and modified following things:
I designed this RAMPS1.4 box to have plenty of space for possible modifications/additions (for example Bluetooth module). Therefore it is a bit higher than KosselMini bottom triangle part, so you need to raise the frame by at least 15mm. To do this I used legs from this project Custom kossel parts by marbalon and additionally I glued to it a piece of foam which absorbs vibrations (I can recommend that, printer works a lot quieter).
For assembly you will need mainly M3x8 screws (for mounting Arduino Mega I used M3x6) and a drop of CA glue if you want attach "Kossel" text to the front of the RAMPS1.4 box.
| box-bottom.stl | 608.5KB | |
| box-left.stl | 225.9KB | |
| box-right.stl | 224.7KB | |
| box-top.stl | 410.1KB | |
| knob.stl | 436.4KB | |
| kossel.stl | 32.9KB | |
| lcd-box-bottom.stl | 599.3KB | |
| lcd-box-top.stl | 352.8KB | |
| lcs-box-mount.stl | 130.4KB |
