RamjetX Thrustmaster Wheel Rim Wall Mount 3D Printer Model
The file 'RamjetX Thrustmaster Wheel Rim Wall Mount 3D Printer Model' is (stl) file type, size is 5.8MB.
The file 'RamjetX Thrustmaster Wheel Rim Wall Mount 3D Printer Model' is (stl) file type, size is 5.8MB.
Hi Internet Sim Racers!
After remaking the Logitech base to Thrustmaster Adaptor... it was minor mods to make the locking rig into a wall mount for your spare Thrustmaster Wheel Rims...
There's 3 versions.
A) Thrustmaster Rim Wall Mount External Screws
B) Thrustmaster Rim Wall Mount Internal Screws
C) Thrustmaster Lock Ring and Mounting Puck (Recommended)
The difference is obvious... One will fit on a 100mm patch of wall... where as the other will fit on a much narrower area like a bunkbed post or similar.
It'll take 4mm screws, so you have options for using a a needle point tek screw etc... I just happen to have lots of them from my old technician job.
Instructions...
Screw it to a wall or post... then screw on your Thrustmaster Wheel Rim for display...
If you want to get fancy, print it in clear and put some LED's in it for that RGB goodness....
Enjoy. Let me know how it comes out.
To reuse the Thrustmaster Lock Ring, I also included the lock ring and a puck insert to make it into a wall mount also. They're all included in this model pack and I recommend Using that model as it's slightly easier to align it horizontally if your a little OCD like me.
RamjetX
| RamjetX_Thrustmaster_Lock_Ring.stl | 4.4MB | |
| Thrustmaster_Rim_Wall_Mount_External_Screws.stl | 4.6MB | |
| Thrustmaster_Rim_Wall_Mount_Internal_Screws.stl | 4.1MB | |
| Thrustmaster_Rim_Wall_Mount_Puck.stl | 616.2KB |
![[EDIT:15 Sept 2018] GASLANDS Hot Wheels / Roue – Pneu 3D Printer Model](https://res.3axis.co/632b72af-a9ae-4006-a8bf-b5afec1dae4c/images/8102b687-fef6-4dc9-bb5c-51c99a71c91d_thumb.jpg)
