My dad wanted me to design him a RAM mount, because the ones sold in stores were too expensive. :)
Rotation is 30 degrees per side (60 degrees total).
Fits a 1" (or 25mm) ball.
You'll need:
1x M6 Nut
1x M6 Bolt
1x Spring (optional)
| Middle_part_A.stl | 255.2KB | |
| Middle_part_B.stl | 263.1KB | |
| Ram_mount_3.0.stl | 1.2MB | |
| Wing_Nut_m6.stl | 72.2KB |
