RAM Compatible Mount For Handlebar 3D Printer Model
The file 'RAM Compatible Mount For Handlebar 3D Printer Model' is (stl) file type, size is 493.6KB.
The file 'RAM Compatible Mount For Handlebar 3D Printer Model' is (stl) file type, size is 493.6KB.
This is a model of a RAM compatible mount with a B ball for 22mm and 25.4mm (1inch) handlebars.
There are two different models for the bottom part: One is designed for M5 nuts and the other is designed for melt-in threads. Choose the one you like.
Beside the printed models you need two 25mm M5 Allen screws and two M5 nuts or two M5 melt-in threads.
For best results, see the notes at the section Print Settings below.
| RAM_Mount_for_1inch_Handlebar_Bottom_Melt-In.stl | 154.7KB | |
| RAM_Mount_for_1inch_Handlebar_Bottom_Nut.stl | 132.0KB | |
| RAM_Mount_for_1inch_Handlebar_Top.stl | 268.4KB | |
| RAM_Mount_for_22mm_Handlebar_Bottom_Melt-In.stl | 154.5KB | |
| RAM_Mount_for_22mm_Handlebar_Bottom_Nut.stl | 131.8KB | |
| RAM_Mount_for_22mm_Handlebar_Top.stl | 268.3KB |
