RAM Camera Mount & Clamp For Artillery Sidewinder 4 Plus 3D Printer Model
The file 'RAM Camera Mount & Clamp For Artillery Sidewinder 4 Plus 3D Printer Model' is (3mf,stl) file type, size is 6.4MB.
The file 'RAM Camera Mount & Clamp For Artillery Sidewinder 4 Plus 3D Printer Model' is (3mf,stl) file type, size is 6.4MB.
A mix & remesh of multiple items. Wanted to use RAM arms & mounts on my Artillery Sidewinder X4 Plus. As far as I can tell, it should also work on all SW X4 and SW X3
All parts were retouched in meshmixer.
It requires no screw mount on the printer. The RAM arm requires a M5 screw and nut. You can also add a small spring between the two arms, there is a groove to hold it in place
By default, all parts should be printed with 40% infill. I used gyroid infill.
The RAM ball stems should be modified by be printer at 100% infill
The clamp should be printed with a brim, to support the ball, otherwise it will roll on its side during printing before the stem is attached.
I am including the project file for Orca slicer (.3mf) that includes all parameters. Feel free to adapt.
| Camera_RAM_Arm_SW4+.3mf | 2.3MB | |
| Printer_clamp.stl | 4.4MB | |
| RAM_arm_no_trap_modded_reduced.stl | 1.3MB | |
| Ram_arm_nut_trap_modded2.stl | 1.1MB | |
| RAM_ball_camera_thread.stl | 3.9MB | |
| Wing_Nut_m5.stl | 28.7KB |
