The file 'Raleno 192 Lightbox Adapter For DSLR Scanning With Lomography Digitaliza 135 And 120 Masks And 5×5 Mounted Slides 3D Printer Model' is (stl) file type, size is 427.7KB.
This is my first published design; I had a lot from this community and time has come to give something back, as long as I can. Hope someone will find it help/useful.
Remixed from https://www.thingiverse.com/thing:4903586 [Thanks!] to adapt the lightbox to a Raleno 192 led panel for use with Lomography Digitaliza 135 and 120 scanning masks and 5x5 mounted slide covers.
Things details:
I divided every piece in two halves to print on a 235x235 bed, since each one of them is oversized; among the stls you will find the split as well as the whole pieces, as long as you own a printer with a bed larger than mine. Once printed, I used 4x 4x20mm open tension pins to join the two halves of the lightbox base, while covers are designed to just sit on. The space to place the Digitaliza masks is designed slightly larger to allow the best positioning upon the light source.
Print details:
You'll get a better top surface if you enable at least 6/7 upper layers, but it's just aesthetics and it takes more filament and print time; functionality is exactly the same, up to you (see pics for difference between 135 and other covers).
Printed in black PETG for greater strength and to avoid any undesired light leakage; details below. Post processing not necessary unless some final light stringing between the two upper pins of the covers, very easy to remove.
Designed in Tinkercad, sliced in Prusaslicer, printed on Creality Ender3 V2 with glass carborundum plate, covered with a slight layer of 3D Milk to avoid warping as much as possible.
Lomography and Digitaliza are trademarks of Lomographische GmbH, a Vienna-based private limited company.
| Raleno_192_lightbox_half_120_cover_01.stl | 30.2KB | |
| Raleno_192_lightbox_half_120_cover_02.stl | 253.7KB | |
| Raleno_192_lightbox_half_135_cover_01.stl | 30.2KB | |
| Raleno_192_lightbox_half_135_cover_02.stl | 255.6KB | |
| Raleno_192_lightbox_half_5x5_cover_01.stl | 189.7KB | |
| Raleno_192_lightbox_half_5x5_cover_02.stl | 52.6KB | |
| Raleno_192_lightbox_half_base_01.stl | 54.4KB | |
| Raleno_192_lightbox_half_base_02.stl | 58.3KB | |
| Raleno_192_lightbox_whole_120_cover.stl | 311.4KB | |
| Raleno_192_lightbox_whole_135_cover.stl | 282.6KB | |
| Raleno_192_lightbox_whole_5x5_cover.stl | 249.0KB | |
| Raleno_192_lightbox_whole_base.stl | 112.9KB |
