I have seen this model around facebook and pintrest so I thought I would try to create my own design. This model should work on most printers however you need a decent enough tolerance on your printer to make sure the mechanism works. The total size is 140mm x 140mm x 135mm. There are 2 different axles included the larger one has not bee tested but theoretically should work with no problem. The larger the axle the larger the waves will be.
If you have and questions or queries please feel free to commen
Heres a video of it working: https://www.youtube.com/watch?v=n1qLXmk2NP4
| Axle.stl | 2.9MB | |
| Axle_Bigger.stl | 3.2MB | |
| Base.stl | 212.6KB | |
| Circle_1.stl | 73.1KB | |
| Circle_10.stl | 995.0KB | |
| Circle_2.stl | 72.9KB | |
| Circle_3.stl | 72.7KB | |
| Circle_4.stl | 72.5KB | |
| Circle_5.stl | 72.2KB | |
| Circle_6.stl | 71.6KB | |
| Circle_7.stl | 70.6KB | |
| Circle_8.stl | 69.2KB | |
| Circle_9.stl | 65.7KB | |
| Guide_1.stl | 20.8KB | |
| Guide_2.stl | 80.2KB | |
| Handle.stl | 232.9KB | |
| Pin.stl | 95.6KB | |
| Piston.stl | 6.5KB | |
| wall_1.stl | 13.4KB | |
| Wall_2.stl | 14.9KB |
