Rails For Under Desk Drawers Like IKEA Raggisar 3D Printer Model
The file 'Rails For Under Desk Drawers Like IKEA Raggisar 3D Printer Model' is (STL) file type, size is 61.6KB.
The file 'Rails For Under Desk Drawers Like IKEA Raggisar 3D Printer Model' is (STL) file type, size is 61.6KB.
Since I didn't want to spend ages printing an under desk drawer, I used an IKEA RAGGISAR drawer tray for it. This way I only had to design and print some simple rails.
The rails are 20 cm long. The RAGGISAR is 40cm long. Because the things I keep in the drawer are not very heavy, I only used one rail on each side.
So you just need 2 or 4 of the Rails, some 4 mm screws and of course a RAGGISAR. You can also use any similar tray like IKEA STÖDJA or SMÄCKER. Of cours it doesn't have to be a tray from IKEA.
The "Stop" is supposed to prevent the drawer from falling out. I printed it with TPU.
| Rail.STL | 142.9KB | |
| Stop.STL | 106.5KB |
