Description Files (4)

Summary

Boring Story Time

I built the Prusa V2 enclosure, but mounted a single spool on top as I don't have the MMU upgrade. However, I drilled the filament hole off-center... which made me rage. I thought it was fitting that I use a rage face to cover the incorrectly positioned hole. It certainly felt appropriate as I spent hours trying to work through Blender's bull ****.

Files Present

RageGuideBolt.stl - Short bolt, print for mounting on a hollowed out Ikea lack table. Drill hole needs to be approximately 9mm. 12mm bolt head.
RageGuideBoltLong.stl - Long bolt, 50mm shank, print for mounting on a full thickness Ikea lack table. Drill hole needs to be approximately 9mm. 16mm bolt head.
RageGuideTest.stl - Small test block to ensure the bolt will thread into the head using your slicer settings
RageGuide.stl - Pissed off filament guide

Printing

I used 5% infill for the head as this part doesn't need any strength. I used PETG and no supports to print it. I suspect just about any plastic should work fine. I printed the bolt at 30% infill.

Print a bolt and the test block first. Verify the bolt threads into the block. When satisfied with your bolt, print the head.

RageGuide.stl	36.5MB
RageGuideBolt.stl	151.4KB
RageGuideBoltLong.stl	149.5KB
RageGuideTest.stl	143.2KB

Rage Face Filament Guide 3D Printer Model

Summary

Boring Story Time

Files Present

Printing

Tags

You might also like