Radxa Rock 5B Case 3D Printer Model
The file 'Radxa Rock 5B Case 3D Printer Model' is (stl) file type, size is 333.2KB.
The file 'Radxa Rock 5B Case 3D Printer Model' is (stl) file type, size is 333.2KB.
This is a case for Raxda's Rock 5B SBC. After struggling to find a nice case for it, I decided to make one myself.
Rock 5B fits nicely and even eMMC modules and NVMe SSDs can be installed. The case features plenty of holes for airflow when used with Radxa's official heatsink.
There are multiple different versions of the top and the bottom half of the case:
The top half can be printed with or without a cutout for the GPIO pins.
The bottom half comes in 3 versions:
The case requires 4x 20mm M3 aluminium standoffs, 5x heat set M3 inserts and 4x countersunk M3 screws, which can be found here:
Spacers (20mm): https://aliexpress.com/item/1005004763829560.html
Inserts (4.5mm OD, 4.5 - 5mm length): https://aliexpress.com/item/1005003582355741.html
Screws (M3x10mm): https://aliexpress.com/item/4001199728978.html
Optionally an additional M3 screw can be installed near the HDMI port to prevent the board from moving or bending.
| Rock_5B_Case_Bottom_-_No_HDMI_Input.stl | 1.1MB | |
| Rock_5B_Case_Bottom_-_No_HDMI_Input_-_No_Buttons.stl | 1.1MB | |
| Rock_5B_Case_Bottom_-_Standard.stl | 1.1MB | |
| Rock_5B_Case_Top_-_No_GPIO.stl | 1.2MB | |
| Rock_5B_Case_Top_-_Standard.stl | 1.2MB |
![MIT Cre[at]e Challenge Prototype For People With Autism 3D Printer Model](https://res.3axis.co/3abd08a8-3210-4df3-a582-5dd56b9cbf17/images/cb9406f8-d4f9-4b59-9f6c-4384203004f7_thumb.jpg)
