Hereby a enclosure for the Radioberry SDR Tranceiver with attached Juice Board.
The Radio is a project made by https://github.com/pa3gsb/Radioberry-2.x.
Enjoy
73 Der OZ1CE - Claus
I made for Resin Print (GeeeTech ALCAID LCD printer) - But the STL's should work on Any 3D printer (You need to reslice)
| RadioBerry_Juice_C-BoxFillet002.stl | 5.9MB | |
| RadioBerry_Juice_C-TopFillet001.stl | 2.5MB | |
| RadioBerry_Juice_C.FCStd | 2.3MB |
