Radio Fm Diy HEX3653 Case 3D Printer Model
The file 'Radio Fm Diy HEX3653 Case 3D Printer Model' is (stl) file type, size is 23.1KB.
The file 'Radio Fm Diy HEX3653 Case 3D Printer Model' is (stl) file type, size is 23.1KB.
Video on Youtube
https://youtu.be/SOndK2IN06I
Small box for DIY FM radio station bought on AliExpress.
https://s.click.aliexpress.com/e/_EGzSV8f
You will need to solder the wires from the AA box to the FM radio PCB by passing the wires through the hole in the FM radio box.
Don't forget to switch the radio to antenna mode using the headphones.
To secure the buttons on the plate, apply some hot glue and close the assembly, ensuring that the larger part of the 3D-printed buttons makes contact with the buttons on the FM radio PCB.
To close the assembly, it is recommended to use strong glue and secure it with rubber bands for 30 minutes to 1 hour.
And finally, glue the AA battery holder to the back of the 3D-printed box for the DIY FM radio, preferably using hot glue.
If you encounter any issues, please don't hesitate to let me know.
| Radio_Fm_Diy_Case.stl | 396.4KB |
