If you're looking for an interesting, low cost 3D printed project to build then check out my Radio Controlled Land Yacht project. All the .STL files are here together with a full parts list including screws and electronics. Happy 3D printing and happy sailing!
For more information please visit: http://3DPrintHQ.com/rc-land-yacht
| Parts_List.pdf | 341.5KB | |
| radio_cable_clip.stl | 28.2KB | |
| radio_tray.stl | 101.5KB | |
| rear_axle_joint.stl | 78.6KB | |
| rear_axle_ring.stl | 29.8KB | |
| rear_wheel_axle.stl | 75.1KB | |
| sail_boom_joint.stl | 134.2KB | |
| sail_clip.stl | 76.0KB | |
| sail_end_ring.stl | 104.2KB | |
| sail_mount.stl | 36.1KB | |
| sail_servo_arm.stl | 265.1KB | |
| steering_arm.stl | 205.8KB | |
| steering_bar.stl | 96.0KB | |
| steering_joint.stl | 129.5KB | |
| tyre.stl | 3.1MB | |
| wheel.stl | 634.9KB | |
| wheel_nut.stl | 61.6KB |
