Radial Engine ( Compressed Air Engine ) Experimental 3D Printer Model Free Download

Description Files (17)

Summary

Radial Engine ( Compressed Air Engine ) Experimental

Hi guys,
This model is an experimental project.

It might be evolving and you can modify as you want to make the best version of it.

Don't hesitate to make your own and to upgrade it. Please send me a message if you made some modifications.

Update:

17/05/2018: Add rubber scal ( NinjaFlex Semiflex )

Other parts required:

=> 1 pcs Pneumatic connection 6mm male thread R1/8 Connector Push to Connect
=> 1 pcs M4x45mm bolt (this can be any desired length)
=> 10 pcs M3x10mm bolts
=> 30 pcs M3x30mm bolts
=> 2 pcs nut M4
=> 3 pcs washer M4
=> 6 pcs washer M3
=> 2 pcs 604-ZZ bearings
=> 10 pcs 3mm brass collars (these can be cut from brass tubing with inside diameter of 3mm and outside diameter of 4mm)

First Test:
https://youtu.be/3oi1DlCIssU

Assembly video instructions:
https://youtu.be/T6aWXmJwaBY

Disclaimer:

If you wish you 3D print this engine, do so at your own risk. Working with high pressure air is DANGEROUS and I hold no responsibility for your actions. All parts were printed to the highest strength possible and I can't guarantee that your parts will be the same.

Assembling.STL	9.5MB
case.STL	857.6KB
cone_helix.STL	133.6KB
connecting_rod.STL	28.0KB
connecting_rod_master.STL	112.1KB
crankshaft.STL	94.6KB
cylinder.STL	238.7KB
cylinder_head.STL	706.6KB
ecrou_din934_m4-6-1.STL	49.5KB
helix.STL	494.4KB
piston.STL	103.9KB
Radial_Engine_Compressed_Air_Engine.STEP	3.2MB
rubber_scal_cylinder.STL	32.9KB
rubber_scal_cylinder_head.STL	98.5KB
screw_din_912-m3x0_5-10-8_8-1.STL	88.8KB
screw_din_912-m3x0_5-30-8_8-1.STL	76.4KB
screw_din_912-m4x0_7-40-8_8-1.STL	74.9KB